SCX24 Kenworth 3D模型

scx24 Kenworth

2023-08-24 06:57:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

THIS IS FOR THE SEASONED BUILDER
This is a scx24 coversion kit for a kenworth w900.Still needs a few add ons and updates will happen frequently to make this kit even better. I just didnt want yall to wait anymore.
This kit is pretty big and will require a few things

1- hardware ranging from standard scx24 screws to 2mm and 3mm screws
2- you need a 280 motor commonly found in the mini b and t
3- you will need 1 front scx24 axel with servo mount and 2 rear scx24 axel
4- you need a scx24 pass though kit for a 6x6 conversion
5- you need a gladiator rear drive line and a c10 rear drive line
6- esc of your choice a stock scx24 esc will work is you change connectors
7- you will need standard scx24 wheel hexs
8- you will need 2x 2mm rods to lock axels in place till i figure out an alternative
9- you have to remove front axel pins to allow freespin of front wheels for scale feature
10- 2 stock shocks for the front axels

now the kit is pretty much figure it out on your own for now till i film a assembly video. electronics can be hidden in the sleeper.

tips-
1- wouldnt hurt to have a few small drill bits on hand.
2- when putting rear axel trusses on center goes on regularly rear axel you will need to flip the truss and use the axel links to link them together file is in the kit for both parts.
3-use a 2mm rod on the front chassis to lock in the front axel a hole is there
4-use a 2mm rod on the second hole from the center of the rear fenders to lock in rear axel
4-super glue is your friend use where you see fit
5- cab if printed correctly will pressure fit on to the cab mount

if you have any questions hit me up on facebook messenger sean vachon