勒巴顿门灯夹克修复指南

LeBaron Door Lamp Clip Repair

2023-08-25 17:34:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For Chrysler LeBaron coupe or convertible 1990, 1991, 1992, 1993, 1994, 1995 door mounted courtesy light / lamp. The lower retainer tab tends to break off. Print this part and snap it into the hole. This will not work if the entire lover part of the tab has broken off. A large and small type are provided, depending and how your tab broke off. If this fits, it is very difficult to remove without risking damaging the lamp housing further. So I recommend trying the small one first. If you are concerned with fit, shrink the part in the Z axis to about 6mm when slicing, to make a sample piece. A smaller piece will allow more side access to the part that will go inside the lamp, and can be removed from the lamp housing easily by taking a small driver to the retaining tang.

For part numbers:
4374828
5269344

Should also fit Dodge Daytona 1990, 1991, 1992, 1993.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament brand:
eSun
Filament color:
Any
Filament material:
PLA+
Notes:
Highly recommend PLA+ as it has a bit of give and flexibility. Try to print without a brim because it will be very difficult to remove and clean the edges.