Galaxy Tab A壁挂式安装盒子内

Galaxy Tab A in case Wall mount

2023-08-25 19:59:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Simple Galaxy Tab A wall mount to allow for charging and music while mounted on the wall in a case still. Done in 2 pieces for smaller printers to be able to complete. Needs supports in some areas depending on orientation I printed this with the Screw tabs on the build plate. Sized for 8g screws.
Printed in PLA+ with 20% infill and 3x3x3 for top, bottom and walls. Tree supports worked well.
Step files included so you are free to modify to suit just add as a remix please. This isn't fully refined just general use print like many of the others.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament brand:
Esun
Filament color:
Black
Filament material:
PLA+
Notes:
Printed in PLA+ with 20% infill and 3x3x3 for top, bottom and walls. Tree supports worked well. Could be done with some design revisions to remove need for supports but I only needed a set of these so project closed off and moving on.

How I Designed This

Design process.

Nice simple one. Measured all the needed dimensions, looked for one that had been designed before and came up empty.
Opened Onshape and in 15 minutes knocked this out with rectangles, semi circles and some fillets.