Galaxy MP5K UZI型步枪股票适配器

Galaxy Mp5k Uzi Stock Adaptor

2024-04-08 02:31:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

With the help of BlitzLab and bluemike807 I created a fully functional Adaptor to use this slick Uzi Stock. I changed a few things to stabilize some parts, added lenght and made clearance for the spring.

Printed with supports only on build plate. You may have to redrill the pin holes so they slide through easily, it´s a snug fit overall so may scale the Adaptor to 103%. Scale the Stock Bar for a pressure Fit to 103%, for this you´ll have to heat up fittings for the Hinge and Stock Plate with boiling water (not too much).

Sling swivel is hard to break, will hold the weight of the Mp5k but maybe not forever. I recommend putting some cord through it first and then attaching it to a sling.

Added the Backplate without hinge so you can try out other options.

Will only Fit on a Galaxy Mp5k.

Tell me if you need help or have suggestions.