墙体穿透安装盒用于CAT6通信缆线
Wall Penetration Bushing for CAT6 Cable
2023-08-27 00:56:24
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I used to have something similar to use when running network service cables into a building from the CPE. I ran out several years ago and instead of buying new ones, I decided to design and print my own. I have designed this to fit in a 1/2" hole.
- A professional appearance over a hole in the wall.
- Has a smaller hole to allow ground to be run through the same hole.
- A dab of silicon around the indent in the base will seal the bushing from the elements.
- Prevents kink in the wire when transitioning inside the wall.
- Prevents wear damage to wire.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:No
- Resolution:.2
- Infill:100%
- Filament brand:
Hatchbox
- Filament color:
Black
- Filament material:
PETG
License
CC BY-NC
Wall Penetration Bushing for CAT6 Cable
by Only1Mattrix is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Yoto玩家卡持有者2023-09-16 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07 -
拒绝的手势2024-04-19 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24 -
Hante计时器适配器适用于Daisy 880气枪2024-05-02
最热下载
-
车身RC 1/10 全套2023-03-26 -
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）2023-03-26 -
Dado - 立方体模型2024-03-24 -
拒绝的手势2024-04-19
-
沙箱建筑模型2024-05-08
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
HGX lite v2支架2025-07-18 -
弹弓HGX-FRAME V1A2025-07-18 -
艺术雕像（女性）2025-07-16 -
苍井空老师全身像苍井空跪姿2025-06-27