Nerf粗剪速率加载器 Mk.1

Nerf Roughcut Speed Loader Mk.1

2023-08-27 09:22:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a speed loader designed for the Nerf Roughcut 2x4. The speed loader is assembled by jamming the smaller of the two parts (the Pusher) into the larger one (the Block). The tabs on the pusher must point in the direction that the holes open to on the block. The pieces should be facing the correct direction in relation to each other in the print file. To operate, ensure that the pusher is placed at the back of the block. Load the block with eight darts and store it for later. When you need to quickly reload your roughcut, align the block with the front part of the Roughcut, and pull the tabs towards you. This should load all eight darts into the blaster.

Note: I currently lack access to a 3D printer, so this print is untested. I recommend printing on an infill setting of 5-15% to test the viability of the print before going all-out. Please let me know if you found this print successful or, if not, tell me how it failed.

Thank you!