Nerf十字电击器前置握把

Nerf Crossbolt Angled Fore Grip

2023-09-06 19:22:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I removed the rail adapter from the grip design by cmccoll8588 and attached the functional blank Nerf rail mount from cameronlconnor (https://www.thingiverse.com/thing:2331212). I then cut off the front of the grip and extended the back to better fit the overall lines of the Nerf Crossbolt. I've found it to be a significant improvement in ergonomics over the stock blaster or the use of a vertical grip.

Overall fit is very similar to a genuine Nerf accessory; i.e., a little loose but unlikely to fall off without some extreme shaking. I suggest printing the adapter linked to above on its own if you want to test the fit without printing the whole grip.