全高头盔站立
Full Height Headphonestand
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Yet another Headphone Stand
I designed this, because I wanted a Headphone Stand that could be printed in one piece, yet accommodate larger Headphones.
It is designed to be printed standing, so I can make use of the available height of the Creality Ender 5. I printed with 20% infill and it seems to be plenty strong. Note, that with a height of 240mm it might not fit your Printer.
I tested:
- Hifiman Sundara
- Sennheiser HD600
- Fidelio Kopfhörer X2HR
They all fit really nice, except for the HD600, where setting it down can be a bit fiddly because of the top padding.
Some of the design is inspired by this Headphonestand for the Sennheiser HD800S on Printables : https://www.printables.com/model/428406-sennheiser-hd800s-headphone-stand
Print Settings
- Printer brand:
Creality
- Printer:
Ender 5
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.2mm Layer Height
- Infill:20%
- Filament brand:
Das Filament
- Filament color:
Anthrazit V2
- Filament material:
PLA
Tags
License
Full Height Headphonestand
by LordJepeto is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
复古风格闹钟架2023-03-26 -
贝瑞塔 92FS 3D模型2023-03-26 -
Mulita 教育机器人 2.02024-03-25 -
Fidget 3D模型2024-04-24 -
超清乌龟鱼缸2024-05-04
最热下载
-
SpaceX星舰S20/B4 3D模型2025-07-15 -
二十面体骰子模型2024-03-29 -
NA Miata车灯遮光条折叠机构顶盖2024-04-15 -
法兰尺寸测量工具（小）2025-07-16 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27
最新模型
-
JK剧集BMS屏幕支架设计2024-05-08 -
24byj到NEMA17适配器2024-05-08 -
大房子惊魂：背叛与插入 第三版2024-05-08 -
砂布圆盘转孔2转换器2024-05-08
