Candle Model
Candle Mold
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
After printing your mold, insert the wick into its joint, tighten the two pieces of the mold (with the help of a bench vise or clamps), and pour the melted wax.
After a few hours (when the wax is solid) your new candle will be ready.
I didn't use any type of lubricant, the wax came off the piece very easily.
To help you detach the two molds from each other, you can help yourself with a screwdriver by inserting it in the 2 holes on the side.
I tried printing this in PLA and it held up to temperatures, i recommend a fairly high filling.
Candle Diameter: 6cm
Tags
License
Candle Mold
by MaroDavide is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
特斯拉 Mini 3 Pro 无线遥控自行车支架2023-03-26 -
星际之门：宇宙使命号2023-03-26 -
AH-KU MkII 侦察/近战机器人2023-03-26 -
手提袋受Pikachu启发2023-05-04
最热下载
-
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。2024-03-18 -
王国之泪TOTK光龙塞尔达传说2024-04-20 -
地牢方块积木，定制升降装置 1x1型定制立管(兼容地下城积木)2025-07-16
最新模型
-
Broncolor Pulso G缩放旋钮2024-05-08 -
改进型紧急停车系统AMC-AASD15A2024-05-08 -
24byj到NEMA17适配器2024-05-08 -
触摸屏支架2024-05-08 -
专业版 React 17 无刷电动升级2024-05-06