Candle Stand

2024-04-05 00:32:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Created a candle stand for taper candles that I tried printing in glow in the dark filament just to see how it worked.

For design, I was just going for something whacky that you probably won't find much.

Holes are 20 mm diameter.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
100
Filament brand:
Any
Filament color:
Any
Filament material:
Any
Notes:
I imagine as the candles get lower the heat might start to melt low temp filaments so I would suggest PETG or ABS, or just changing out the candles before they get to low if you're using something like PLA

License

CC BY-NC-SA

Candle Stand
by LowNOxFlare is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型