油滤器24毫米接口
Oil filter Socket 24mm
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a 24mm oil filter socket with 1/2 inch drive. Used to remove and/or install engine oil filter housings in various vehicles.
Based on "Socket 24mm" by Sly0072. Improvements:
- Wider/thicker outer body for increased strength
- Shorter drive square depth for increased strength
- Narrower drive square hole for a more secure fit
- Drive square divots added for a solid snap fit on a ratchet
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO NEPTUNE 3 Pro
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:85% triangles
- Filament brand:
whatever
- Filament color:
black
- Filament material:
ABS
- Notes:
Print with ABS, PETG or other material that can withstand high heat to prevent warping in storage.
Use thick walls of at least 4 lines for strength.
Add a 5 line brim for increase bed adhesion.
My print used 12.2 m of filament.
Note: PLA would probably work if stored in a cool place when not in use. Storing PLA objects in a garage or other non-climate controlled areas may encounter excess heat that could cause warpage.
Tags
License
Oil filter Socket 24mm
by dougk49 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
精美的NERF枪奖品2023-05-26 -
火箭旋转发射装置2023-06-03 -
MQ-1B型号的掠夺者无人机3D模型2024-04-12 -
NES游戏手柄配件3D模型2024-05-04
最热下载
-
吸血鬼之夜2024-01-15 -
Arduino或5V继电器控制板固定架2024-04-02 -
地牢方块积木，定制升降装置 1x1型定制立管(兼容地下城积木)2025-07-16 -
CZ455 452 512杂志架基座2024-04-22 -
沙丘巡游者2024-05-03
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
长方形型立体储物架2024-05-08 -
简易蘑菇模型2024-05-08 -
ZOHD Dart 250电池托盘2024-05-06 -
A Simple Jumping Spider Perch 3D模型2024-05-06