M-Wave F+R式前轮自行车架 MTB悬挂支撑

M-Wave F+R Carrier Front Bike Rack MTB Suspension Mount

2023-09-09 23:12:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I will later take real pictures of this thing installed on my bike. It is tested and works

This is an adaptation for this specific front/back bicycle rack/carrier by M-Wave. This rack is made to be screwed to rim brakes, so I had to design this piece to mount it to an mtb front suspension fork.

If your filament is not old and brittle, it should bend easily around the fork without breaking. I tried in ABS and PETG and it bent fine.

You have to mirror the part in Cura to get the left side piece. You can print both at the same time close together, if you don't get a lot of stringing.

The second piece is an extra, so you can extend your ebike headlight if you have one.

The hardware needed for the fork mounts are:

x4 M5 bolts (minimum 15mm)
x4 M5 nuts
x1 M6 bolt (minimum 15mm)
x1 M6 nut
x1 M6 washer (optional)

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO Neptune 2
Rafts:
No
Supports:
No
Resolution:
0.24
Infill:
50
Filament brand:
Winkle
Filament color:
Black
Filament material:
ABS
Notes:
I printed in ABS for maximum strength, if you can't print ABS, a good PETG with high infill and walls should do the trick.