加固版月台

Moon Stand (reinforced + E26 lamp socket fit)

2023-09-10 06:22:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a re-remix of the "Alternative Lithophane Moon Stand" which is further modified with a reinforced attachment point and the addition of a lip on the bayonet connector that is an exact fit for a standard American E26 ceramic light socket (which can be liberated from most desktop light fixtures or bought as a "pendant/hanging light socket" for <$10). This avoids the need for special bulbs/sockets, since a CFL or corn-type LED will fit into the lamp while still using the regular connection type. Huge improvement in terms of light output over the tiny chandelier baby bulbs normally used for these, which helps the lithophane to really show through even in less translucent filament.

This works with both the Designer Moon Lithophane Lamp here and the excellent Jupiter lithophane found on Printables (https://www.printables.com/model/440508-lithophane-jupiter-lamp). Not sure why the .STL is 100mb, maybe since this was thrown together hastily in Cura? The most important change if you do it yourself is adding a 41mm max 34mm inner 2mm high support tube flush with the base, then making it print as a normal mesh. The small bit of overlap with the threading creates linked adjacent walls, making it a pretty sturdy stand even in PLA.

It'd be nice to make this bayonet connector a more standardized style for printable lamps, those LED strips are a hassle and corn LEDs have a perfect cylindrical form factor and are bright as AF, same price basically too (https://a.co/d/b3GCVQE). Can think of a few other planets that'd make good lamps...

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.24
Infill:
100
Filament brand:
CC3D
Filament color:
Black
Filament material:
PLA-Max
Notes:
No supports, make sure brim is outside only and ~0.4mm from edge for clean tear-off; both the bayonet outer surface and lamp socket inner ring need to be dimensionally precise, so turn off any initial layer extra flow too.