流量计量仪器

Flowmometer

2024-01-05 14:14:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This was made for my daughter's science fair project.
It is for measuring the flow rate of very thick substances over time.
The valve / stopper is inserted to block the flow. Then the block is removed and the flow
length is measured after a chosen amount of time.

To measure the flow, a ruler is put in the cut-out on the side of the Flowmometer.
Then the measurer is moved to where the flow stopped and that is how you get your measurement.

We used a C-THRU 12" stainless steel ruler and measured using millimeters.
A 6" ruler would fit a lot better.

The vessel in the Flowmometer where the substance is placed is close 1/4 cup in volume.

All pieces were printed with a 0.4mm nozzle with a 0.1mm layer height.

The measurer and valve / stopper will need to be printed standing up for the dimensions to be perfectly correct and for the bottom of those to be perfectly flat.
The STL preview is displaying them upside down.

The CAD program used was FreeCAD 0.21.1
I have included the CAD files so you can easily modify to your needs.

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
20%
Filament brand:
Creality and Sulu
Filament color:
whatever you want
Filament material:
PLA
Notes:
Print both the valve / stopper and the measurer in upright positions.
Takes linger but the dimensions will be way better and the pieces will fit together better.
The STL preview is displaying them upside down.

Post-Printing

Post print work.

Put the pieces together (should be very obvious how they go)
Slide the measurer along the Flowmometer multiple times to make it slide easier. It should free up enough to slide very easily with no sticking.
Insert / remove the valve / stopper multiple times so it is easy to remove it to start the flow test.