GE Opal 2 台面式冰箱机 - 磁吸冰铲器架
GE Opal 2 Countertop Ice Maker - Magnetic Ice Scoop Holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The original does NOT fit the included GE Opal 2 countertop ice maker scoop. It is about .75" too short and the width is a bit too snug.
I didn't like how short the bottom scoop portion was.
I needed it to be taller and wider anyway to fit the factory scoop so redesigned to be taller on the bottom half for both functionality and aesthetics.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu P1S
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Infill:20%
- Notes:
-When printing, to strengthen the ears, split the object 'bottom' into sections. Section with the ears has can have more wall loops and more infill to strengthen. The included bambu profile has this set already.
Post-Printing
Assembly and Materials
-To assemble, gently use a heat gun to warm up the ears so they do not break when pushing the top nubs into place.
-Glue the small magnets into the top portion.
-The bottom bar magnets can be glued in as well, or use the included 3m tape.
Strong 60x10mm bar magnets for the lower half to reduce sliding
https://www.amazon.com/dp/B07WCBDPMJ/ref=cm_sw_em_r_mt_dp_F5SQ0CGMD03V2VR0PVSS?_encoding=UTF8&psc=1
10x2mm round magnets to the lid is easily pulled back.
https://www.amazon.com/dp/B0753ZPBLQ/ref=cm_sw_em_r_mt_dp_AX0S6VF2B55XK15MMWC8?_encoding=UTF8&psc=1
Tags
相关内容
联系我们
热门推荐
-
二十一号3D模型2023-03-26 -
Mx5 Mk3 (NC) 风挡盖罩子附件带logo2023-07-25 -
Mobula 6盒3D模型2024-01-17 -
Zojirushi 米饭煮锅露水收集装置2024-03-21 -
USB数据线模块化接口卡2024-03-28
最热下载
-
螺旋齿轮玩具3D模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
沙箱建筑模型2024-05-08 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
任意立方体活动关节的一体打印外星人2025-07-19 -
裸女站立2025-07-16 -
原神优菈2025-06-27 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
