精美的小型国际象棋棋盘盒

Mini Chess Board Box

2024-01-06 16:56:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This chess board box has been completely redesigned from the ground up with inspiration from the original creators design.

Changes:

Overall dimensions have been changed to fit on my Ender 3 V2 NEO printer (210mm x 210mm build volume). Individual part dimensions have been simplified and designed to be more consistent between each part with tighter tolerances than the original.
There is now a hole that has been implemented on the back of the drawer compartment to accommodate a thin round magnet purchased off Amazon (diameter of 20mm and thickness of 2mm). Secondary hole on the inside of the box to align with the drawers magnet. This prevents the drawer from falling out too easily.
Added glue channels between matting surfaces between pieces. This allows more surface area for glue to bond to during assembly as well acts as a template of where to apply glue.
More fine detail in the overall design such as: chamfered alignment pegs for easier assembly, rounded edges for a more polished end product, and the tips of the alignment pegs are no longer visible in the four corners of the top border.

Chess set is not included. You may need to scale/resize your chosen chess set pieces to fit in the squares of this design. Each tile is just a hair over 22mmx22mm. Its best to round down to a even 22mms at the base of each chess piece.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V2 Neo
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.16mm
Infill:
20%
Filament brand:
MHBuild
Filament material:
PLA
Notes:
Slicer used: Cura 5.6.0
Infill pattern: Triangle
Nozzle Temp: 200c
Bed Temp: 50c

Supports are required for the handle of the drawer compartment and the overhangs at the top of the magnet holes on both the drawer and the inside of the box.