Playseat Challenge 轮子支架改进型杆轴
Playseat Challenge Wheel Bracket Brace Modified Rods
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The original rods didn't line up well with my base plate position so I tweaked the rods a little by shortening them and adding a twist to make them sit flush in the brackets. This solution was needed for mounting my Moza R9 with the base plate in the furthest position. They work perfectly with original brackets created by floano which you need to print. I printed these at 80% infill for extra strength but they could probably be printed with less infill if desired.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V2 Neo
- Rafts:No
- Supports:Yes
- Resolution:.2
- Infill:80%
- Filament brand:
Overture
- Filament color:
Matte Black
- Filament material:
PLA
License
Playseat Challenge Wheel Bracket Brace Modified Rods
by DougS2K is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
ST150轮子螺母更换2023-05-01 -
Wörthersee 11cm Tester2023-05-13 -
3D数据可视化模型2023-05-13 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04 -
抗压模型2024-04-17
最热下载
-
全能3D打印机测试2023-03-26 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
Dado - 立方体模型2024-03-24 -
Apple鼠标 - M0100 3D模型2024-03-25 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
丰田22RE发动机Starer电机2025-08-08 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
HGX lite v2支架2025-07-18 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24