MMDVM双向帽子Raspberry Pi 3快件盒
MMDVM Duplex Hat RaspberryPi3 Snap Case
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This case is for use with the Raspberry Pi3b and MMDVM_HS_HAT_DUPLEX v1.47 with the .96" display and the new style antennas.
This Hat is the one I used: MMDVM Duplex Hat
I originally printed the case remixed by @wtxdxer however it didn't quite fit my display location or the new slim antennas. I also applied a hex grid pattern instead of the slits to hopefully release more heat. The new hat may also be slightly higher as I had to modify @fred909's standoff ever so slightly to get the hat to fit level with the Pi3 Board. Also took the time to inset the screen with some beveled edges.
The snap fit case works really well and is tight. I find it easiest to separate by pushing in at the LAN corner of the top and then starting the separation.
Future To Do:
- Pry point to separate case halves
- Vertical Dock
- Adjust Antenna Holes (Slightly off)
- Remix an ultra slim case
- Inset fan (somehow)
- Find time to do the above
Print Settings
- Printer brand:
Voxelab
- Printer:
Aquila V2
- Rafts:No
- Supports:No
- Filament brand:
IIID MAX
- Filament color:
Blue
- Filament material:
PLA+
- Notes:
A little stringing with all of the hex grid, may want to slightly lower your nozzle temp from normal.
Tags
相关内容
猜你喜欢
联系我们
最新模型
-
手指锯2024-05-08
-
386/486 CPU 3D模型提取工具2024-05-08
-
自行车电池计量架2024-05-08
-
显卡支持2024-05-08
-
Taco Bell 国际象棋棋盘:国王棋子2024-05-08
最热下载
-
伊瑟宁加德骰子塔(奥斯坦克)2024-01-17
-
21700毫安电池单元保持架2024-04-06
-
街用迷你四驱车轮子2024-05-01
-
花环戒指2024-05-08
-
旅行游戏盒2024-05-08