Biqu H2 v1 ADXL345喷嘴支架

Biqu H2 v1 ADXL345 Nozzle Mount

2024-01-08 04:40:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Note: This mount is for the Biqu H2 v1 with the Phaetus heater block

I was inspired by this mount (https://www.thingiverse.com/thing:4897289) and I figured I would design one for my Biqu H2, since I don't have the heater block the thing was designed for, and I didn't find a similar styled mount for the Biqu H2 heater block.

To install, remove the silicone sock from the heater block, and slide the mount on from the heater cartridge side. I have mine set up so the heater cartridge is on the front side of the toolhead, mainly for better clearance because I have the part cooling fan mounted on the back of the toolhead.

To remove, hold either side of the mount, and push on the heater block through the opening on the mount.

Be careful not to put too much pressure on the heater block, or you risk damaging the heatbreak.

I've included the STEP file exported from Fusion 360 for anyone that needs it.