Ikea厨房水槽喷嘴

Ikea kitchen faucet aerator

2024-01-08 05:23:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is not a real aerator as it does not mix air into the water, but with proper infil it can laminarize the flow of the water in desired way. I use it as a replacement for my original Ikea faucet aerator, which broke down.

It has diameter nearly 18.5mm and correct thread to fit into the Ikea kitchen faucet.

Model is solid, so you create inner pattern using your favourite infil pattern when omitting top and bottom layers. For me the grid or gyroid patterns work fine, using cca 30% infil density. Print with 0.1mm layer height as the thread is quite fine.

Print Settings

Resolution:
0.1
Infill:
30
Notes:
- no top and bottom layers
- use infil pattern that is "leaky" from top to the bottom (which does not seal the aerator) - in cura -grid / gyroid with 30% of infill density

Tags

aerator faucet ikea kitchen plumbing

License

CC BY-NC-SA

Ikea kitchen faucet aerator
by pejvl is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

Ikea厨房水槽喷嘴

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Anycubic i3 Mega / Mega-S Marlin 1.1.9 定制固件 - 额外功能与质量优化
2023-03-26
SnapMaker J1驾驶舱扩展3D模型
2023-04-05
HGLRC SECTOR D5 DJI ACTION 2 SUNNYLIFE NDPL滤镜支架20度
2023-04-08
PGO BR200 验车速度传感器盒
2023-08-09
JBL Partybox 310 3D脚垫橡胶脚侧用型号
2023-09-09

最热下载

最新模型