工具夹具套装用于制作硬币环

Tool Holder for Derlin Push Rod Set for Making Coin Rings

2024-01-08 10:42:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Tool holder for your Delrin Swedish Die Pushrods that is avaiable on Amazon. There is a spot specifically for each delrin pushrod. I over sized the holes for the tooling by 1/16" to allow for tooling varations and filment variations.

I printed mine with pretty basic settings for PLA in Cura. Followed the temps on the roll, and had it print pretty quick, like 130mm/s I think. I did 40% infill just cause I wanted the tool holders stiffer so that I could pick one up and carry it in one hand without worry of it bowing and something falling out of it's place.

The URL to the tools themselves.
https://www.amazon.com/Double-Sided-Derlin-Swedish-Method/dp/B07PMLCN7R/

The STL file and the Sketchup should be included in the package.

工具夹具套装用于制作硬币环

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

5英寸照片框支架
2023-06-03
Steampunk Union Steam Hurlant
2024-03-29
山羊/精灵族/魔鬼角 - 可拧上或穿过发丝
2024-04-05
多彩短蛇
2024-04-21
我对Ring的爱
2024-05-05

最热下载

最新模型