美乐小型PC望远镜快速安装支架

Mele Mini PC Telescope Quick Attach Mount

2024-01-09 03:15:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I just updated my astrophotography PC to the Mele Overclock 4C and wanted a mounting system allowing the new PC to be attached to either of my two telescopes. With the top part mounted to the PC, it can be quick attached to as many telescopes as you want, provided they have the bottom quick-attach base installed.

The .stl files should drop onto your slicer's print bed in the best orientation for printing. The infill I used was 30% for the base and 5% for the upper. The base requires supports "everywhere" so the locking tab can print. The upper part doesn't require any supports.

This will work with any Mele mini PC that comes shipped with the same metal mounting adapter that comes with the Overclock 4C. I'm assuming at the very least it will work with the Mele Overclock 3C, but others may have the same 80mm spaced 3mm threaded mounting holes on the bottom of the PC. If so, it should work with them.