Cr10s Pro V2 传动带张力器
Cr10s Pro V2 Belt Tensioner
2024-01-09 20:08:04
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is my solution to the issue with Cr10s Pro Y belt not being able to be adjusted leading to wearing and breaking of the belt and bearings.
Print the Screw piece in something that doesn't creep as its under high tension and PLA will start to creep and deform.
I used carbon fiber PETG.
Hardware needed
- Idler gear with 3mm bearing and 12mm diameter for the belt
- M3 18mm screw and hex nut for the idler gear (no teeth)
- m4 22mm screw do act as the lead screw
- m4 large nut to adjust the tension (could print one with m4 threaded insert inside
- 2x M4 22mm to fasten the bracket to the frame
Designed to fit original belt length so if replacing a belt like I did cut to the same length
Print Settings
- Printer brand:
Creality
- Printer:
CR10S PRO
- Rafts:No
- Supports:No
- Infill:75%
License
CC BY-NC
Cr10s Pro V2 Belt Tensioner
by horendus is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
8.6毫米黑暗模式，口袋快扣模块弹药盒2023-03-26 -
原型Kongu Inika面具 | 以Noble Ruru为基础2024-03-31 -
丰田RAV4车门座椅夹板螺栓更换2024-04-20 -
H0比例尺的门信号桥接器2024-04-21 -
丰田22RE发动机Starer电机2025-08-08
最热下载
-
Wii 枪机制：Gunslingers 旧式手枪触发器模组2023-03-26 -
BF1 单枪手机 08/18型号 Lego2024-03-23 -
21700毫安电池单元保持架2024-04-06 -
泰坦电视核心升级，升级版泰坦巨人核心2025-07-16
最新模型
-
任天堂Gamecube排气模型2024-05-08 -
轻量级螺旋桨2024-05-08 -
树莓派相机外壳模型2024-05-08 -
3D打印机导线存储架2024-05-08 -
苹果专业版音响格栅2024-05-06