Bunker Hill防壳山塑料弹药盒替换式拉锁

Bunker Hill Plastic Ammo Box Replacement Latch

2024-01-09 22:36:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Replacement latch for Bunker Hill plastic ammo can. Needs original metal C bar.
I'm hopeful it's a little bit stronger than the original.
Not so obvious from the default layouts are some ridges for grip/texture.You probably don't want to print those on the bottom, so flip it over

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Filament brand:
N/A
Filament material:
PLA
Notes:
Print flat side down / Ridges up; Or print the ones without grip ridges
Support only the pins
1.6-2.0mm wall should ensure all the important parts are strong enough

Dimensions listed in thumbnail images in case you wanted to try and remix it for a different case.

How I Designed This

I bought a Bunker Hill cheap plastic ammo can from Harbor Freight; before I had a chance to use it for anything I had broken the latch!
Makes total sense to spend a half day learning CAD software to 'save' a $5-10 case, right??
This is my first model and my first FreeCAD project, so go easy on me!