1/18比例工作状态远程控制坦克
1/18th Scale Working RC Tank
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This RC Tank is designed to be around the 1/18 scale mark. It weighs in at just over 10 pounds and has high torque from the 2, 29T 550 Motors inside also making it highly maneuverable. This model comes with visual model animations on assembly and instructions and information on exactly what you need to complete this tank.
Materials Needed
-(240) M3x14mm Screws
-(8) M5x15mm Screws (Screw Head Height Under 3mm)
-(32) M3x8mm Screws
-(12) M3X10mm Screws
-(22) 5mm ID x 10mm OD x 4mm Length Bearings
-(1-1/2) Spools of Filiment
-(4) M5 Nyloc Nuts.
-(2) M3x4mm Set Screws/Grub Screws.
-(8) 10mm Diameter Magnets (Optional For Body Top)
-550mm of 5mm Stainless Steel Rod.
-130mm of 5mm Stainless Steel Threaded Rod.
-(2) 550 29T Motors (You can use 35T For Higher Torque but Less Top Speed)
-(2) Traxxas XL-5 ESC's (You can use whatever Brushed ESC. I just had the best luck with Traxxas)
-(1) Flysky FSI6 Reciver and Transmiter. (You can use any transmitter and reciver you want just make sure you can mix channels)
-(1) 2S Lipo 5000mAh
Tools
-Grinder / Dremel
-Grinder With Cutoff Wheel (Or Something to Cut Stainless Steel Rods)
-Bench Vice / Hammer
-Soldering Iron for Electronics
-3D Printer with Build Volume of at least 250mmx300mm
Link to Video on Instagram: https://www.instagram.com/p/C12TKtzLvv7/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==
YouTube Channel:
(Video on the Tank is in the making)
https://www.youtube.com/@RadioFlyer05/videos
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 Max
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:15%-25%
- Filament brand:
Eelgoo
- Filament color:
Black
- Filament material:
PLA+
- Notes:
-Printed on Ender 3 Max Neo
-Must have a bed size of 250mmx300mm to print
-25% Infill For Everything Except For The Body
-15% Infill For Body
-0.2mm Layer Height
-No Supports Except For The Track Fairing Pieces
Tags
License
1/18th Scale Working RC Tank
by Radioflyer05 is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
最新模型
-
尼琳替换式烤架2024-05-08 -
144001 后部扰流板2024-05-06 -
太阳能板支架2024-05-06 -
TLR-1 (HL) 型铁路钥匙，适用于 1911 和 2011 年的模型2024-05-06 -
Meshtastic Yagi 16mm pcv tube2024-05-06
最热下载
-
ZTE MU5001 上位电容器2024-01-10 -
Quansheng UVK6 桌面支架2024-01-10 -
苹果 HomePod mini壁挂装饰2024-03-19 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
基础鸟饲料架2024-04-30