鹿角枪架及外套夹持支撑架

Deer Antler Gun Rack, Coat Holder, etc - Bracket

2024-01-10 10:46:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I took the antlers from spuzzle's published Thing here: https://www.thingiverse.com/thing:4865295, greatly enlarged it, added a few things, and turned it into a sturdy gun rack for my rifles at my cabin.

I have not done a weight test on them yet, to see how much weight they can hold; however, they're pretty hefty and should be able to hold an AR-10 or larger rifle, using two of the antlers, without any issues.

I printed this with a 30% and 50% infil - both seem very capable of holding my rifles. Recommend higher infil percentage if you plan to hang a .50 cal or some other elephant gun from these things.

One antler can be used as a coat rack, extension cord hook, or basically a generic hook for anything, within a reasonable weight, that requires being held by a 3D printed deer antler (lol).

I've successfully printed a few of these now without any need for support during printing.

No, the Leatherman Wave does not print out with the antlers - it was used to give a general idea of how large the antler hooks are (scale).