无刷微型四旋翼飞行器 1103型号电机 2英寸螺旋桨 26x26尺寸 AIO飞行控制器

Brushless Micro Quad for 1103 Motors 2 in. props 26x26 AIO Flight Controller

2024-01-13 04:29:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

无刷微型四旋翼飞行器 1103型号电机 2英寸螺旋桨 26x26尺寸 AIO飞行控制器

Summary

This is my first shot at making a quadcopter/drone frame for FPV. I'm using brushless 1103 motors, and a BETAFPV F4 AIO flight controller with 26x26 mounting pattern.

Print two of the legs/battery holder. I used tree supports at 60 degrees and a brim and they came out great. A 600MaH battery fits perfectly or you can use rubber bands for a smaller battery.

Camera holder is still WIP but I use a rubber band around the frame in an X pattern over the camera and it stays put even in crashes.

Uses 2-3mm hardware to assemble, the 4 screws of the main frame are used to mount the camera holder as well as the legs. No nuts needed.