可调节式 MagSafe 监视器支架

Adjustable MagSafe Monitor Holder

2024-01-13 04:57:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a three-part MagSafe mount for any display that is up to 22mm thick. You can either use the rear camera (for example as Continuity Camera) or flip the holder over and use the front camera the additional screen.

Post-Printing

Material

1 M3*40 screw

1 M3 nut

1 MagSafe ring/ charger (I used these: https://a.co/d/hxEXm14 ; https://www.apple.com/shop/product/MHXH3AM/A/magsafe-charger?)

If you want to use your own ring or charger you can modify the customizable holders that are also uploaded for example in Prusa Slicer. Just subtract a cylinder. (If the model is centered: Y: center-13,5mm) https://help.prusa3d.com/article/negative-volume_238503
Please consider uploading a remix if you did.

Assembly

Put the three parts together. insert the nut at the side and add screw the screw in from the other side.
Depending on how you put in the top part with the magnets, your camera will either be facing forward or backward.