小型智能手机支架

Mini Smartphone Stand

2024-01-13 23:44:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a small and simple to build smartphone-stand to hold your 6" Smartphone or similar - preferably horizontal - while watching a movie for example.

The shape to embrace the phone is quit specific though.
Good chance anyway that it will fit yours, so compare dimensions first!

Angle of the phone can be adjusted.
Resistance depends on how much the screws have been tightened, so friction holds it in place.
Works just fine.

Uses 2 M5x10 Flathead screws acc. to ISO 10642.
They thread into the plastic directly.

Dimensions in Millimeters (mm).

Hope you like it!
Best regards from
Bernd's Custom 3D's

Print Settings

Printer brand:
Anycubic
Printer:
i3 Mega X
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
100%
Filament brand:
Any
Filament color:
Any
Filament material:
PLA
Notes:
Optimized for 0.4mm nozzle!

Post-Printing

Drill holes for M5 screws to 4.7-4.8mm.
May add a small chamfer to the hole to help the screw grab.

Requires removal of support structures and a bit of sanding probably.
But not so bad after a coat of flat black spray paint.

Tags

smartphone holder smartphone stand

小型智能手机支架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

Glock 17/34 Solidworks 模型文件
2023-04-21
数字世界1234
2024-01-03
Soldering Iron & Tips holder for C245 C210 C115 tips
2024-04-12
硫化机模型
2024-04-13
Ikea 米兹顿插嵌
2024-04-20

最新模型