又一款飞行中智能手机支架设计

Yet another parametric versatile In-flight smartphone holder

2024-04-24 00:00:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This versatile smartphone holder intend to be used in in flight or on a desk table.
on an airplane, it can be hanged to the tray when stowed or just be used as a classic smartphone stand on the tray.
I can also be used on a desk in portrait of landscape (even in full vertical position)

I provides the FreeCAD file. Using the spreadsheet module you can easilly change :

Smartphone thickness (including case)
Smartphone wide (including case)
Holder angle (when hanged on a tray)
Holder wide (if you want it larger / smaller)

It is not really a remix as I start if from scratch as available model was not easy to use / to print for my use. however, it is widely inspired of existing models.

Note that the STL file include is sized for a Pixel 7a with Magsafe case (see pictures)
Wide : 78.3 mm
Thickness : 12.2 mm

It should fit if your smartphone has very similar dimensions. if not, just edit the FreeCAD file, export the body as STL, print and enjoy !

My print info :