Klicky终止开关用于Flying Bear Ghost 6

Klicky endstop for Flying Bear Ghost 6

2024-01-14 01:10:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Based on the Condor Head for FBG6 by Chiffa which is based on the well-knopwn Klicky-Probe by Jlas1. It gives Flying Bear Ghost 6 standard (stock) printer head klicky-probe support.

I took the back plate from the excellent job from Ryoko (originally for 3d-touch) and modified it deeply to achieve the results needed.

This design includes four parts:

Klicky-Probe (which jumps from the printer head to the dock and viceversa)
Klicky-Dock (the part where the probe usually remains. The Dock is attached to the dock-support)
Dock-Support (attached to the chamber fan)
A new Back-Side of the printer head box to replace the stock one, and where Probe is attached when needed.

You could get printing settings, assembly instructions and configuration from my GitHub:

https://github.com/ColdBeer72/Klicky-FBG6