独立立立滤线存放盒

Free standing filament spool holder by Williegoat1

2024-01-14 06:54:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Free standing filament spool holder by Williegoat1

I designed this around a piece of 5/16” all-thread and common 608 ball bearings.

You will need:
1 – 6” to 6.5” length of 5/16” all-tread
2 – 608 bearings
2 – 5/16” hex nuts
2 – 5/16” flat washers

Print (PLA):
1 – roller
1 – spacer
2 – inner flange
2 – outer flange
2 – handle

Print (TPU):
2 – sleeve
2 – end plug

Print the roller standing up, it will need supports. If you print the handles with the outer end down, you should not need supports. The bores for the bearings in the roller might need some very light sanding to fit the bearings. The spacer goes inside the roller, between the bearings to keep the inner races from being forced inward when you tighten the handles down. I cut a small slot for a screw driver in each end of the all-thread to ease assembly. I have included two images to illustrate the order of assembly.