美国标准城镇广场摩擦环更换
American Standard Town Square Friction Ring Replacement
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a replacement friction ring for the American Standard Town Square part M961729-0070A (Friction Nut and Friction Ring part). If you overtighten the nut, it's pretty easy to break the original. Ideally you won't be as silly as me and do that, but if you do, this should save your project compared to waiting a week+ for the part!
Compared to the original, this part does not sit as far down. This seems to be fine; just align the friction nut, correctly align your pillar with the friction nut's flat spots, and push it over the ring.
Print Settings
- Printer brand:
QIDI
- Printer:
6.08 Mono
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.2mm
- Infill:30%
- Filament brand:
Overture
- Filament material:
PETG
- Notes:
The original part feels like nylon. I can't say why that was selected initially and printing this part in nylon would have been more of a pain than I felt like dealing with!
Mine fit perfectly, but you may need a bit of trial-and-error (or sandpaper) if your printer struggles with dimensional accuracy.
Tags
License
American Standard Town Square Friction Ring Replacement
by siredman is licensed under the GNU - GPL license.
相关内容
联系我们
最热下载
-
Dado - 立方体模型2024-03-24 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
P90 AEG型号空气枪到Odin Airsoft速率加载器适配器2024-05-01 -
花环戒指2024-05-08 -
比基尼模型2025-07-16
最新模型
-
海豚鱼饼干模具2024-05-08 -
D型接口适配器2024-05-08 -
磁力USB盒2024-05-06 -
外部电机用鼓风机2024-05-06 -
Quadlock 桌下手机固定器2024-05-06