3dsjs

Nerf Rival Pathfinder XXII-1200瞄准镜替换

Nerf Rival Pathfinder XXII-1200 Sight Replacement

2024-01-16 09:21:29

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

These replacement sights don't cause damage to the blaster and does not require the entire shell to be removed during assembly.

Parts include a blank sight (to completely remove the barrel sight), a low profile iron sight and a less intrusive iron sight that mimics the original.

PRINTING:
Recommended to print with PLA or PETG.

.3mf files included in the .ZIP

Note:
The “leg” that supports the overhanging feature should be cut in half with flush trim snips (see images)
The remaining part of the leg that is still attached to the overhang afterwards will slot into an exposed notch at the base of the sight assembly.

INSTALLATION:

  1. Remove the pump
  2. Remove the the 5 screws holding around the barrel (see image)
  3. Pull up on shell near sight and remove the original green sight
    Careful not to pull so hard as to break the plastic - it does not require much space to
    remove the sight
  4. Replace the sight with the new printed part
    If inserting the blank sight keep in mind the orientation of the part. The “leg” should fit
    inside the notch towards the rear of the original sight assembly.
  5. Replace screws & pump

Please visit our Etsy shop to see what else we do!
https://kettlefishcreations.etsy.com

**Please ignore print quality in photos - these prints were used to test new settings.

Tags

License

CC BY-NC

Nerf Rival Pathfinder XXII-1200 Sight Replacement
by KettleFishCreations is licensed under the Creative Commons - Attribution - Non-Commercial license.

Nerf Rival Pathfinder XXII-1200瞄准镜替换
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢