Wifi Trax-WFD 30 外壳
Wifi Trax- WFD 30 Case
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a case for a wi-fi device from Wifi Trax. WD-30.
The unit plugs into the NCE cab bus and gives you Wi-Fi throttles (phone or TCS UWT).
Case is assembled with 2-56 screws x4
Use 2-56 screws in the 4 corners to hold the box together.
Drill out the clearance holes in the print with a #41 drill
Lightly drill with a #50 drill the bottom holes and tap with a 2-56 tap or just be gentle with the screws in the plastic.
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra 2
- Rafts:No
- Supports:No
- Resolution:0.25
- Infill:20%
- Filament brand:
HatchBox
- Filament color:
Black
- Filament material:
PETG
- Notes:
Notes: Kobra 2-Pro (not available from list)
Bed Temp 80c
First layer 250c
other layers 245cdid use a brim to prevent edge curling. It mostly separates when you pull the print. Edges sanded to remove sharp edges.
License
Wifi Trax- WFD 30 Case
by tucstrlly is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
超酷的飞鱼式飞翼模型，无需胶水，快捷连接2023-03-27 -
GPD Win 2 高性能3D工作站2023-04-30 -
中世纪风格拉链2023-05-06 -
圆形人行道100毫米2024-03-25 -
3D模型: Lula2024-04-07
最热下载
-
GPD Win3 把手型号2023-04-07 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
Dado - 立方体模型2024-03-24 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
弹弓HGX-FRAME V1A2025-07-18 -
鞋带锁2025-07-17 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16 -
关节活动人，假人13,Dummy 132025-07-02