索尼 Dualshock 3 携带盒/充电器 3D模型

Dualshock 3 Holder/Charger

2024-01-16 15:40:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a simple holder for your PlayStation3 Controller. You can either fix it by using double sided tape or with screws. The holes on the side can be used to fix the charging cable with hot glue. With the holes at the bottom you can guide the cable in a desired direction.

There are 4 Versions:
With brackets and with holes (mounting brackets for screws and holes for hot glue)
With brackets and without holes
Without brackets and with holes
Without brackets and without holes

To fix a charging cable inside to use the holder as charger:
1) Guide the charging cable through the holder
2) Connect the cable into the controller
3) Put the controller into the holder, make sure the cable stays connected
4) Apply some hot glue through the two holes. Use enough glue, exess glue can be removed easily with a cutter when cold.
5) Let the glue cool down
6) Have fun ;)