英雄系列 Gen7 黄蜂架式适配器

Hero me gen7 hornet gantry adapter

2024-01-17 18:46:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Adapeter to mount the base of hero me (i do not used the stock artillery hornet hotend, instead i've used a v6 one and a bmg extruder, but i had reused the stock extruder motor).
The are 11 hole in it.
The 2 bigger ones are for the screws for the wheels.
The 4 in the bottom are for connecting the base of the hero me
The upper 2 i've used them for secure the extruder and the motor and they connect to the bmg front mount where i've added two heat insert (i don't kwon if they are meant for that purpose).
For the last 3, they are the one that connect to the rest of the print, the furthest on the side are meat to be screwd watching the print from the front and they will go directly in the threded hole of the default aluminum mount. The center one is very difficult to be mounted from the front so i've left a spsce for a 4.2x3 M3 heat insert to be inserted and so you can screw a bolt in from behind.
There are 4 version, the thick versions (10mm thickness) are because using a v6 hotend the heatblock cannot rotate properly using the thin versions (5mm thickness).
The versions with the spacer are used for do not leave space between the adapter and the bmg font mount.

Print Settings

Printer brand:
Artillery
Printer:
Artillery Hornet
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50
Filament brand:
Giantarm
Filament color:
Yellow
Filament material:
PATG
Notes:
i've created some holes that have a features for be able to print them without support and it need a 0.2 leyer height.
I've also used 3 walls + an alternate wall in cura for having a lot of strengh given that this will support all the weight of the hotend.