CR10 V3的结构支持

Structural support for CR10 V3

2024-03-12 09:27:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Why I done it?

First this 3D printer is quite heavy for me and the reinforcement bars were disturbing me to carry the printer.

Second I had print quality issues for the bad structural rigidity that, in previous versions of the CR10, did not have that problem according to what several users have told me.

Also one of the upper bearing was stuck and I have ringing issues showed in the print part

What I need it?

2x M5X50 mm + nuts + o-rings + self locking nut for the upper part
2x upper couplers for each upper support (4 in total)
2x M5x 60 mm + + nuts + o-rings + self locking nut for the lower part
2 x lower couplers for each lower support (4 in total)
8x M4x10 + t-nuts
All OEM screws and t-nuts, both upper bearings, the upper bearing cover and the reinforcement bars.
I didn't design the cover for the upper part because you can reuse from factory one.

I has been tested and designing for almost one month and a half. Yeap… Maybe it will be not the best design but I needed it to fix it and put it back to work as soon as I can.

So I will appreciate your comments and likes about the design

Also, you can improve it but take in consideration that the angle that I put, it's to avoid losing z-height,

Take in consideration that Creality design machines for hobby not for profesionals… So, for me it's a great improvement.