Morphy Richards 替换控制旋钮
Morphy Richards replacement control-knob
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is the control-knob for a Morphy Richards (models 48710, 48705, …) slow-cooker.
More than one that I've owned has broken.
Post-Printing
Rather than printing the horizontal M3 hole for the bolt, a pilot-hole is printed, which must be progressively reamed using a pin-vice.
Stringing around the holes can be smoothed with short blast from a hot-air gun.
Light sanding on the two flat surfaces.
How I Designed This
It's designed to attach to a ~6.4 mm steel shaft & is locked there by an M3x12 hex-socket bolt & M3 nut.
There's clearance for M3 washers between the bolt-head & the print, to enable the effective bolt-length to be reduced.
Custom Section
Improvements
The images depict the part printed in black PLA, though since the failure of the original part was probably related to temperature, it may be better in PETG.
The pointer doesn't quite align with the text on the body of the slow-cooker, & should be rotated slightly counterclockwise in remixes.
Tags
猜你喜欢
联系我们
热门推荐
-
N尺寸澳大利亚国家铁路VFX模型2023-03-26 -
Minecraft 古朴庄园2023-03-27 -
GoPro ND滤镜适配器从Naked8到102023-06-07 -
蜘蛛X1激光气体抽吸喷嘴2024-01-10 -
TEKNO EB410.2后部支撑架上升部分2024-03-24
最热下载
-
SpaceX星舰S20/B4 3D模型2025-07-15 -
Nissan S13 Silvia BN 运动装备套件 RC车身 1:10 3件2023-08-23 -
罗宾：不公正22024-04-07 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
基础墙钩2024-05-08 -
鲁格MK IV弹匣底座垫2024-05-08 -
RC模型2024-05-06 -
迷你R50 DIY收音机2024-05-06