Makita螺丝刀固定架

Makita screwdriver mount

2024-01-18 20:57:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wanted to create a holder, with a few particular features, for my Makita 18V screwdriver.

No load on chuck, bearings or bits. Carrying the weight through the rigid outer structure of the tool.
Compact design that is easily combined with other holders and mounts. Might alter the design later to inter lock additional mounts with each other.
Self centering, easy to fit.
Works with bits mounted in chuck if room is available behind the mount.
*Can support tool even with battery installed.

Designed to be mounted with 6x ~3mm counter sunk screws. You can probably get away with using only 4 screws, one in each corner, but I like to be on the safe side so I made it for 6.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Supports:
No
Resolution:
28mm
Infill:
>10%
Filament brand:
EasyPrint
Filament color:
Blue
Filament material:
PLA
Notes:
Can be printed with out supports with ok result but I recommend tree supports over 45°.

Print in picture made with 1,6mm wall thickness and 10% cubic subdivision infill. This is the absolute minimum amounts of infill in my opinion.