编号8（或更小）的小球过滤器
No. 8 (or smaller) birdshot sieve
2024-01-18 21:26:35
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Just your regular sieve to separate #8 or smaller birdshots (≤ 2,3mm diameter) from wider pellets. This might come in handy if you have different sizes of spare pellets all mixed together and you want to separate them for easier reloading.
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Resolution:0.30mm layer height (speed)
- Infill:15%
- Filament brand:
Sunlu
- Filament material:
PLA
- Notes:
The sieve size is set after Prusa MK3 bed dimensions. It took me 23 hours to print this item this way.
How I Designed This
OnShape
This thing is a 20x20cm square. Walls and floor are all 5mm deep. Each row has 48 holes 2,3mm diameter each.
Tags
License
CC BY-NC-SA
No. 8 (or smaller) birdshot sieve
by LongRangeShooter is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
KABA DORMA 钥匙盖 3D模型2023-04-27 -
Wifi Trax-WFD 30 外壳2024-01-16 -
osVAC新型法兰饼夹具（M25）2024-03-17 -
轻巧 AAA 电池容器2024-03-27 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最热下载
-
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
Ikea 米兹顿 插嵌2024-04-20 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
CZ455 452 512 弹匣底板2024-04-22 -
Woods Mower 30922 护盾保持者2024-04-24
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
CB550空箱架2024-05-08 -
10件套钻石缝纫盒2024-05-08 -
Oral-B双齿夹持器3D模型2024-05-06 -
比尔泰马维夫特2024-05-06