Guitar Pedal Light Switch

2024-01-19 11:03:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a cross post of the original post of mine on Printables.

https://www.printables.com/model/700351-guitar-pedal-light-switch

A perfect accessory for your music room! This light switch cover replacement is modeled after a guitar overdrive pedal, with controls for volume, tone, and drive - reminiscent of a classic tube screamer circuit.

Updated v2:

re-designed knob controls for a more elegant design
consistent heights across the knobs and footswitch
the back is hollowed to allow more flush mounting

Tips for printing

Print face up, flat on build plate.I used organic supports, as the back is recessed for flush mounting..
- Turn on Ironing in your slicer for smoother surfaces, but be sure to not use it for the letters.
- Consider adding a filament color change for the knobs and the foot switch to stand out.

Notes:

Designed by me 100% in FreeCAD, poorly
- Screw holes fit a standard light fixture with the original screws, at least during my tests.

I attached pictures of the model in a simulated environment, as well as an actual print i made on my Ender 3 Pro with white marble Polymaker filament.