Hercules Guitar Stand Yoke Extension
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is for adding extra guitars to the Hercules guitar racks (GS525B and GS523B).
Tried to make it look close to the original, and fits snug enough that it stays in place.
I found (for me) the best way to print was to stand it straight up, like the letter "U", with tree support enabled. I used the Standard setting on Cura, set the wall thickness to 4 (from default 2) and 20% cubin infill, and a brim. Speed set to 60.
Takes about 3h 2min to print.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:Yes
- Resolution:Standard 0.2mm
- Infill:20% cubic
- Filament brand:
eSun
- Filament color:
Black
- Filament material:
PLA+
- Notes:
Tree Supports enabled, as well as brim.
License
Hercules Guitar Stand Yoke Extension
by THRobinson75 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
Q1 小型四足机器人 2.0（由Jason工作室设计）2023-03-26 -
3D模型：Creality Ender 3 S1 Pro网络摄像头固定架2024-01-14 -
色拉修斯·克鲁姆（星球大战）2024-04-24 -
创业2024-04-24 -
Daisy花卉线条底部夹持器2024-04-29
最热下载
-
弓箭和投射器战车前轮2023-04-12 -
生态FLOW EcoFlow Wave 2风扇系列,EcoFlow Wave 2通风口2024-02-05 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
线框无心2024-05-08 -
3d打印全向自行车（部分金属在文件里面包含CAD图纸）2025-07-25
最新模型
-
电动锁钥匙2024-05-08 -
比尔泰马维夫特2024-05-06 -
2015年F-150中控台组织架构，带折叠中间座椅2024-05-06 -
Marantz 功放支撑柱2024-05-06 -
雨滴罩密封夹具套装（针对Scirocco MK1）2024-05-06