Philips Norelco 3000系列剃须刀架子3D模型

Philips Norelco 3000 Razor Stand

2024-01-19 12:17:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a vertical stand for the Philips Norelco 3000 / 3100 / 3xxx razor. It looks like a simple bucket with an access cut in the front, but inside it is bumped and shaped to match the head of the razor. Note that the razor will stand up best with the razor's little plastic cover on, but still more or less works without it.

This works with all Norelco 3000 / 3100 and variants (They usually do a Christmas variant for Target which doesn't have the 3000 name on it, but it's the same thing. If it looks like Philips slapped a new branding on the old razor, they probably did and it will probably fit.).

Pretty much any print settings work, with no overhangs or rafts needed. I printed mine with a simple 5% infill, and that worked fine.

Feel free to remix or integrate into your own bathroom organizers as you see fit.