Lee 通用型脱壳装置模具盒

Lee Universal Decapper Die Box

2024-02-04 13:07:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The box the Lee Universal Decapper came in is great, until you put a lock ring or die body adapter on it, at which point it doesn't close.

This is a replacement box that should fit it with both the Hornady or Lee lock rings and quick change adapters. The clasps don't work too great, as PLA is pretty stiff, but it worked well enough for me to not want to reprint it, so I'm uploading it as is; it stays shut, but if you pick it up by the top, may separate.

I made a hole through the bottom that you can roll your instructions up to stash in there if you please.

Note: this was designed around the plate thickness of a hornady LNL progressive press. I included the fusion 360 design file in case you need to make an adjustment.