触须转盘基座

Tentacle Turntable Base

2024-03-13 23:58:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This Tentacle System base rotates on a 608 bearing. You can either add magnets inside to create stable points where rotation stops, or you can omit them and the base rotates smoothly.

This turntable can be useful for photography, or model building or painting.

Required Parts:

One 608 bearing
Optionally up to 23 6x2mm neodymium magnets

Assembly:

Print one of each part
Push the bearing into the center of the bottom
Glue the middle and top pieces together using the bearing to align them (or align the outer edges)
If you want to use magnets, all the magnets in the bottom should be the same polarity and the ones in the middle part should be opposing them not be attracted to them. Otherwise, the magnets will create friction instead of stable points and the turntable will not rotate smoothly.
Use any Tentacle System grip that suits your purpose

The magnets usually stick in place without any glue, but you can glue them in place if needed.