甲虫袭击机：设计优化内饰 - 40K

Termite Assault Driler with Designed Interior - 40K (updated with bolter turrets as of 19th march) by Martijn Gros (TheDukeDesigns)

2024-03-14 16:56:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This Termite Assault Driler with Designed Interior - 40K (updated with bolter turrets as of 19th march) was made by Martijn Gros (TheDukeDesigns),so all credit goes to him

HIS SUMMARY
Hey all,

I've found the "Termite Assault Drill"- Fekalie Apr 30, 2018 on thingiverse not too long ago, and while it's outer design looks awesome, for me it was lacking the interior and guns..

So i made it myself. The Bottom part is still the same (as of now), but the middle and top part are now fused together to both make space for the interior aswell as to print it cleaner.

Assembling

The Hatch fits in the socket inside the drill.
The Energy coil is removeable, and slides in place by first sliding the bottom (with the 'lip') through the hole and then 'turning' it in place, so the back sits flush.
The side doors have some giding slots in the back, these slide over the door hinges. This way, you can glue the doors either all the way open or closed.
Turrets, you can print the mount (both sides) once. The guns themself pushfit onto the turret, but there are slots for 2mm magnets if you want to be sure it stays. Bolter done! plasma and flame Still working on.

Now have fun drilling away towards your foes, with an openable drill!

Note: