金箭 R/C 模型 - 前部撞击板
Golden Arrow R/C Buggy - Front Bumper
2024-03-16 21:26:32
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
One of the first things I printed were parts for my old 80's R/C buggy from Radio Shack.
Print Settings
- Printer brand:
Artillery
- Printer:
Artillery Sidewinder X1
- Resolution:4mm - 6mm
- Filament brand:
NinjaTek
- Filament material:
Armadillo TPU
- Notes:
I originally used PETG for this bumper. The print was flawless and the surfaces where sharp and the text crisp. However one good impact(it was a test) and the bumper cracked. I subsequently used the Armadillo TPU which is harder to print and less detailed, but is the best material for this application. I probablly could have adjusted the settings and it would of printed a little better with more detail.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
TopSolar 100W 太阳能板支撑架2023-05-03 -
冲击RC微型顶点4英寸GoPro英雄支架2023-05-14 -
Ferrari 458 Italia 3D模型2024-01-07 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04 -
gba 游戏 任天趣 红蓝机 插入卡带2024-04-22
最热下载
-
全能3D打印机测试2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
完全可打印的无人机框架2023-05-31 -
Dado - 立方体模型2024-03-24 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
用于HGX Lite的MBOT3D MK2混音版2025-07-18 -
系带3D凉鞋（儿童款）2025-07-16 -
丰满跪姿美熟女2025-07-16 -
兔女郎半身像2025-07-15