3寸通风盖
3in Vent Cover
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
-This is a indoor vent cover for a 3in duct pipe. The vent insert piece slides into the duct and screws into the wall with wall anchors, then the cover plate pops on over top to give it a nice clean look.
-Id recommend printing this with a filament that has a high printing temperature such as ASA because filaments with lower printing temperatures are a lot more prone to warping from the heat coming out of the duct.
-You can use the blank cover model to create your own patterns for the cover plate
Print Settings
- Printer brand:
Anet
- Printer:
A8 Plus
- Resolution:0.15mm
- Infill:40
- Filament brand:
Overture
- Filament color:
Black
- Filament material:
ASA
- Notes:
-Supports are not necessary for the "Vent Lid Insert"
-Supports are recommended for the cover platesUSE A FILAMENT THAT HAS A HIGH PRINTING TEMPERATURE
Tags
License
3in Vent Cover
by JKAMAN280 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
面部线条设计2023-03-26 -
A 笔记本电脑DVD驱动器盒外壳2023-05-01 -
GUY AA 装甲车2024-01-05 -
Heroscape桥墙2024-01-10
最热下载
-
可定制像素珠子照片面板2023-03-26 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
Apple鼠标 - M0100 3D模型2024-03-25 -
GTA 5 大地图模型2024-04-21
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
龙珠孙悟空，无需支撑2025-07-19 -
用于加长杆的戴森配件支架2025-07-17 -
系带3D凉鞋（儿童款）2025-07-16