Jeep Cherokee XJ散热器支架或排水插件3D模型

Jeep Cherokee XJ Evaporator Mount/Drain insert

2024-03-17 11:39:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This project was started because as I was rebuilding my 1999 Cherokee the original flimsy styrofoam condensate drain/holder for the AC evaporator decided that after 24 years it might be time to disassemble itself.

This replacement will need to be hand-fitted to a small degree (done to ensure proper fit/no rattling and avoid excessive reprints for being undersized). I recommend printing sufficiently thick walls to ensure you have around 1-2mm to play with as you size the insert. There is also the option of printing it out of softer materials like TPU.

Installation for me was fairly simple, and both the original and an aftermarket evaporator fit perfectly inside. The fitting was required for inserting the entire assembly into the air box/HVAC box behind the dashboard.

I hope this saves some folks the time and trouble of hand-cutting foam!

If you find this useful and would like to support me creating more oddball bits for Jeep/AMC vehicles, feel free to support me by grabbing prints from:

https://www.ebay.com/usr/funtapaz

Print Settings

Printer brand:
Creality
Printer:
Ender-5 Plus
Rafts:
Doesn't Matter
Supports:
Yes
Filament brand:
Any
Filament material:
PLA/TPU/PETG/Nylon
Notes:
Printing with water and temperature resistant filaments is essential for this object.